home.gif search3.gif vendbutton.GIF sheets.gif listervsbutton.gif compicon2.gif

printreg, April, 2003
"Description of Hazardous Materials/Waste "


New Message Reply About this list Date view Thread view Subject view Author view

From: Debra Jacobson (djacobson@istc.illinois.edu)
Date: Tue, 15 Apr 2003 10:46:31


These DOT rules covering the requirements of describing a hazardous material apply to hazardous waste. These requirements should be followed when describing wastes on the manifest.
Debra Jacobson
-----------------------------------------------------------------------------------------------------------

49 CFR 172.202 How to Describe Hazardous Materials on Shipping Papers

According to 49 CFR 172.202, a hazardous material must be described in a specific sequence without any additional interspersed information. The basic description of a hazardous material must include the following information in this order:
1. Proper shipping name from Column 2 of the Hazardous Materials Table (HMT, 49 CFR 172.101)
2. The hazard class or division from Column 3 of the HMT
3. The UN or NA identification number from Column 4 of the HMT
4. The packing group, in Roman numerals, from Column 5 of the HMT

An example of a correct basic description is: Gasoline, 3, UN 1203, PGII

According to 49 CFR 172.202, the following additional information is required in association with the basic description.
- The total quantity of the material covered by one description must be shown before or after, or both before and after, the basic shipping description.
- You may enter the type of packaging and destination marks before or after the basic description. DOT allows the use of standard abbreviations to express units of measure and types of packaging.
- Technical or chemical names are must be added when the entry for the hazardous material on the Hazardous Materials Table (49 CFR 172.101) has a "G" in Column 1.

Technical or chemical names may be entered in parentheses between the proper shipping name and hazard class of the basic shipping description, or following the basic description. You can use an appropriate modifier such as "contains" or "containing," or the percentage of the technical constituent.

Additional description requirements are outlined in 49 CFR 172.203 for certain hazardous materials shipments, including those related to the identification of marine pollutants, hazardous substances, poisons, and limited quantities. It is important to provide the additional descriptions required by the regulations along with the basic description outlined above.

To access 49 CFR 172.202 on-line, visit http://www.access.gpo.gov/nara/cfr/cfr-retrieve.html#page1
Title: 49
Part: 172
Section: 202

Source: "reg of the day" listserv operated by Tammy Silverthorne @ the Environmental Resource Center



New Message Reply About this list Date view Thread view Subject view Author view